Brush
Cleaner is a premium product designed for conditioning,
cleaning and storing brushes which have been used with 1 SHOT oil-based
paints. This product is intended for reconditioning, softening and
renewing hardened, natural and nylon brushes. It has been specifically
formulated not to interfere with the properties of oil-based sign
paints.
Chromaflo is a flow enhancer that is an additive for
enamels. It enhances vehicle solids, thus increasing gloss and
durability of the final coating. If after the paint film sets, it
feels slightly "gummy," then just add a few drops of
Chromasolv high temperature reducer to regain a proper working
consistency.
Chromasolv High Temperature Reducer is a strong, slow
reducer which retards the evaporation rate and therefore allows for
improved flow and leveling. It is also effective in aiding cure when
painting in conditions of higher than average temperature and humidity.
Edge "The Sign Painter's Thinner" is a
pre-mixed combination of flow enhancer and reducer. This product is
intended for larger scale painting and lettering. The single
component reducer/flow enhancer combination makes it easy to keep paint
flow up, especially when hand lettering larger scale copy and graphics
as well as panels and backgrounds.
|
Hardener is
designed to accelerate dry time for all 1 SHOT alkyd-based paints. 1
SHOT hardener will improve adhesion to most substrates as well as extend
color life and increase gloss. It will also aid in preventing lifting
when an automotive clear coat is to be applied over the paint.
Reducer, Low Temp Reducer, and High Temp Reducer
are products intended to improve flow at normal, low temperature and
high temperature conditions respectively. These products adjust
viscosity and evaporation rate without significantly altering the
quality of the final coating. These reducers are designed for use with
all 1 SHOT and Chromatic products.
Splash has been formulated to make applying vinyl
lettering easier, faster and safer. Splash eliminates air bubbles
and wrinkles, while providing a clean work surface and accelerating
early adhesion.
Tinting Black & White are tinting bases for use
with lettering enamels and bulletin colors. These products help in
achieving various color shades without affecting the properties of the
base coating.
|
