"We have turned the corner from the standard approach to a NEW industry standard..."

Stain Remover

EasiSolv™ 701 Screen Wash is an environmentally approved, 100% active, low odor, extremely quick penetrating and fast acting solvent designed to dissolve and clean virtually all types of screen printable inks, adhesives, clear coatings and stains from printing mesh. Conventional/solvent, UV, electronic, water base and textile inks are quickly dissolved with EasiSolv™ 701 without the hazards and odors usually associated with aggressive solvents and caustic stain/haze removers. EasiSolv™ 701 works quickly and causes no damage to screen mesh.

SPECIAL FEATURES:

• EasiSolv™ 701 dissolves all inks and ink stains quickly, allowing mesh to be rinsed clean with water. 
• EasiSolv™ 701 is a low odor product, providing a more pleasant environment for employees.
• EasiSolv™ 701 contains no hazardous substances (no TLV's, no PEL's) which provide a better working environment for employees
• EasiSolv™ 701 is nonflammable (flash point of 196°) which is much safer than many conventional screen washes.
• EasiSolv™ 701 contains low-foam, biodegradable detergents which contribute to superior ink and stain removal, while providing complete rinseability with water.
• EasiSolv™ 701 is not SARA (Superfund Amendments Reauthorization Act) reportable which requires less solvent monitoring and paperwork.
• EasiSolv™ 701 may be applied manually, recirculated through the EasiFlo™ System, recirculated in enclosed, automatic screen washing systems or simply used in trays or dip tanks, providing superior product life and economy.
• EasiSolv™ 701 may be applied to a wet screen for use as a stain remover, without causing damage to the mesh.

DIRECTIONS FOR USE:

Scrape excess ink from screen, then apply EasiSolv™ 701 to the well and print side of the mesh. Scrub if necessary. Squeegee excess off screen. Using a good high pressure washer, spray rinse the screen starting at the bottom of the well side and work up. Give good attention to the image area of the screen. Rinse the print side of the screen the same. Remove the stencil with EasiSolv™ 5, EasiSolv™ 51, EasiSolv™ 501 or EasiSolv™ 55. Follow last step with an application of EasiSolv™ Screen Perfect Emulsion/Stencil Enhancer. Thoroughly flood rinse with water. The screen will now be ready to reuse.

PRICES:

Send mail to rustyg@southwesternprocess.com with questions or comments about this web site.
Copyright © 2004 Southwestern Process Supply